D-Link DGS-3620-28PC-SI Product Manual page 266

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
The fields that can be configured are described below:
Parameter
Sequence ID (1-
65535)
Direction
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Delete All button to remove all the entries listed.
Click the Edit button under Match Clause or Set Clause to configure the clause.
Click the Delete button to remove the specific entry.
Click the Edit button under Match Clause to see the following window.
The fields that can be configured are described below:
Parameter
Action
AS Path
Community List
IP Address List
Figure 5-149 Route Map Settings - View Detail window
Description
Enter the sequence number for the rule.
Use the drop-down menu to Permit or Deny the matched rule.
Figure 5-150 Route Map Settings - Match Clause window
Description
Use the drop-down menu to Add or Delete a sequence entry.
Click the radio button and specify to match the AS path of the route against the AS path
list. The AS path list specified here needs to be a sub-list of the AS path list associated
with the route.
Click the radio button and specify to match the community of the route against the
community string. Tick the Exact check box to present all the specified communities.
Click the radio button and specify to match the route according to the access list.
256