Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
IP Address
Peer Group Name
Prefix Warning Threshold
(1-100)
Prefix Max Count (1-12000)
Prefix Warning Only
Click the Apply button to accept the changes made.
BGP Neighbor General Settings
This window is used to configure BGP neighbor general settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor General Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Figure 5-123 BGP Neighbor Maximum Prefix Settings window
Description
Click the radio button and use the drop-down menu to select the IP address of
the BGP speaking neighbor.
Click the radio button and use the drop-down menu to select the name of the
BGP peer group.
Enter the percentage the maximum prefix limit on the router starts to generate a
warning message. The range is from 1 to 100.
Enter the maximum number of prefixes allowed from the specified neighbor.
Use the drop-down menu to enable or disable prefix warning only. This allows
the router to generate a log message when the maximum prefix limit is
exceeded, instead of terminating the peering session.
Figure 5-124 BGP Neighbor General Settings window
Description
240
Advertisement
Table of Contents
