D-Link DGS-3620-28PC-SI Product Manual page 113

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
VID
Source IP Address
Unsolicited Report
Interval (0-25)
Unit
Static Router Port
Click the Apply button to accept the changes made for each individual section.
Click the Select All button to select all the ports for configuration.
Click the Clear All button to unselect all the ports for configuration.
IGMP Proxy Downstream Settings
This window is used to configure the IGMP proxy downstream interface in this page. The IGMP proxy downstream
interface must be an IGMP snooping enabled VLAN.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Proxy > IGMP Proxy
Downstream Settings, as show below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
Downstream Action
Click the Apply button to accept the changes made.
IGMP Proxy Group
This window displays the IGMP Proxy Group settings.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Proxy > IGMP Proxy Group, as
show below:
Click the radio button and enter the VLAN ID for the interface.
Enter the source IP address of the upstream protocol packet. If it is not specified, zero
IP address will be used as the protocol source IP address.
The Unsolicited report interval. It is the time between repetitions of the host's initial
report of membership in a group. Default is 10 seconds. If set to 0, it means to send
only one report packet.
Select the unit you wish to configure.
Select the port that will be included in this configuration.
Figure 4-51 IGMP Proxy Downstream Settings window
Description
Enter the VLAN Name which belongs to the IGMP proxy downstream interface.
Enter a list of VLANs which belong to the IGMP proxy downstream interface.
Use the drop-down menu to add or delete a downstream interface.
103