Specifications; 1-Port Gigabit Ethernet Sfp Mini-Physical Interface Module Leds; Table 23: 1-Port Gigabit Ethernet Sfp Mini-Pim Physical Specifications; Table 24: 1-Port Gigabit Ethernet Sfp Mini-Pim Led States - Juniper SRX Series Manual

1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications

Related

Documentation

1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs

Copyright © 2015, Juniper Networks, Inc.
Table 23 on page 35 gives the physical specifications of the 1-Port Gigabit Ethernet small
form-factor pluggable Mini-Physical Interface Module (SFP Mini-PIM).

Table 23: 1-Port Gigabit Ethernet SFP Mini-PIM Physical Specifications

Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 33
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features on page 34
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 19
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules on
page 36
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 35
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration on
page 205
The 1-Port Gigabit Ethernet small form-factor pluggable Mini-Physical Interface Module
(SFP Mini-PIM) has two LEDs located to the right of the socket.
describes the LED states.

Table 24: 1-Port Gigabit Ethernet SFP Mini-PIM LED States

LED Color
LINK Green
ACT Green
Chapter 3: 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module
Value
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
2.96 oz (84 g)
SFP
Mini-PIM
State Description
On Port is online
Off Port is offline
Blinking Port is receiving or sending data
Off Port might be on but is not receiving or
sending data
Table 24 on page 35
35