SRX210 Services Gateway Chassis Serial Number and Agency Labels
SRX210 Services Gateway Mini-Physical Interface Module Serial Number Label
Related
Documentation
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
Copyright © 2012, Juniper Networks, Inc.
The SRX210 Services Gateway has a serial number ID and agency labels on the bottom
of the chassis as shown in
Figure 28: Location of SRX210 Serial Number and Agency Labels
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the SRX210 Services
Gateway. Each Mini-PIM has a unique serial number. The serial number label is located
on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would
be installed on the device). The exact location might be slightly different on different
Mini-PIMs, depending on the placement of components on the Mini-PIM.
Packing the SRX210 Services Gateway and Components for Shipment on page 161
Return Procedure for the SRX210 Services Gateway on page 157
Contacting Customer Support on page 160
If you are returning a services gateway or hardware component to Juniper Networks for
repair or replacement, obtain a Return Materials Authorization (RMA) number from
Juniper Networks Technical Assistance Center (JTAC).
Chapter 23: Returning the Services Gateway
Figure 28 on page
159.
159