Configuring The Firewall Rules; Figure 58 Tutorial: Security > Firewall > Rule Summary - ZyXEL Communications ZYWALL P1 User Manual

Chapter 4 Tutorial

4.3.2 Configuring the Firewall Rules

Suppose you only want FTP traffic to go to the FTP server, so you want to block all other
traffic types (like chat, e-mail, web and so on). The following sections show how to configure
firewall rules to enforce these restrictions.
4.3.2.1 Firewall Rule to Allow Access Example
Configure a firewall rule that allows FTP access from the VPN tunnel to the FTP server.
1 Click Security > Firewall > Rule Summary.
2 Select VPN to LAN as the packet direction and click Insert.
Figure 58 Tutorial: SECURITY > FIREWALL > Rule Summary
3 Configure the rule as follows and click Apply. The source addresses are the VPN rule's
remote network and the destination address is the LAN FTP server.
98
ZyWALL P1 User's Guide