Chapter 4 Tutorial
Figure 53 Tutorial: Firewall Rule for VPN
In order for devices on the remote network to initiate the VPN connection to
your ZyWALL, your ZyWALL must use a static WAN IP address or DDNS (see
Section 8.7 on page
4.3.1 Configuring the VPN Rule
This section shows how to configure a VPN rule on device A to let the network behind B
access the FTP server. You would also have to configure a corresponding rule on device B.
1 Click Security > VPN to open the following screen. Click the Add Gateway Policy
icon.
Figure 54 Tutorial: SECURITY > VPN > VPN Rules (IKE)
2 Use this screen to set up the connection between the routers. Configure the fields that are
circled as follows and click Apply.
94
136).
ZyWALL P1 User's Guide