ZyXEL Communications ZYWALL P1 User Manual page 358

Chapter 22 Logs
Table 128 PKI Logs (continued)
LOG MESSAGE
Cert trusted: <subject
name>
Due to <reason codes>,
cert not trusted:
<subject name>
CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
358
DESCRIPTION
The router has verified the path of the certificate with the listed subject
name.
Due to the reasons listed, the certificate with the listed subject name
has not passed the path verification. The recorded reason codes are
only approximate reasons for not trusting the certificate. Please see
Table 129 on page 358
codes.
DESCRIPTION
Algorithm mismatch between the certificate and the search constraints.
Key usage mismatch between the certificate and the search constraints.
Certificate was not valid in the time interval.
(Not used)
Certificate is not valid.
Certificate signature was not verified correctly.
Certificate was revoked by a CRL.
Certificate was not added to the cache.
Certificate decoding failed.
Certificate was not found (anywhere).
Certificate chain looped (did not find trusted root).
Certificate contains critical extension that was not handled.
Certificate issuer was not valid (CA specific information missing).
(Not used)
CRL is too old.
CRL is not valid.
CRL signature was not verified correctly.
CRL was not found (anywhere).
CRL was not added to the cache.
CRL decoding failed.
CRL is not currently valid, but in the future.
CRL contains duplicate serial numbers.
Time interval is not continuous.
Time information not available.
Database method failed due to timeout.
Database method failed.
Path was not verified.
Maximum path length reached.
for the corresponding descriptions of the
ZyWALL P1 User's Guide