Figure 129 Security > Vpn > Vpn Rules (Ike); Table 57 Security > Vpn > Vpn Rules (Ike) - ZyXEL Communications ZYWALL P1 User Manual

Chapter 13 IPSec VPN
Click SECURITY > VPN to display the VPN Rules (IKE) screen. Use this screen to manage
the ZyWALL's list of VPN rules (tunnels) that use IKE SAs.
Figure 129 SECURITY > VPN > VPN Rules (IKE)
The following table describes the labels in this screen.
Table 57 SECURITY > VPN > VPN Rules (IKE)
LABEL
Activating VPN Rule
VPN Rules
Gateway Policies
My ZyWALL
Remote
Gateway
204
DESCRIPTION
Select the VPN network policy that you want the ZyWALL to use while in zero
configuration mode. This stops unauthorized use of the other network policies.
The row for the network policy you select displays in pink.
N/A means that none of the VPN rules can be used.
You cannot select a network policy that is in the recycle bin.
This field changes to N/A if you delete the selected policy or move it to the
recycle bin.
These VPN rules define the settings for creating VPN tunnels for secure
connection to other computers or networks.
Click this icon to add a VPN gateway policy (or IPSec rule).
The first row of each VPN rule represents the gateway policy.
The gateway policy identifies the IPSec routers at either end of a VPN tunnel
(My ZyWALL and Remote Gateway) and specifies the authentication,
encryption and other settings needed to negotiate a phase 1 IKE SA (click the
edit icon to display the other settings).
This represents your ZyWALL.
The WAN IP address, domain name or dynamic domain name of your
ZyWALL displays in router mode.
The ZyWALL's IP address displays in bridge mode.
This represents the remote secure gateway.
The IP address, domain name or dynamic domain name of the remote IPSec
router displays if you specify it, otherwise Dynamic displays.
ZyWALL P1 User's Guide