Add/Modify Qos Classification Rules - ZyXEL Communications FMG Series User Manual

Table 12 Advance > QoS Classification (continued)
LABEL
802.1p Mark
Delete
Edit
Add
Apply Changes

5.4.1 Add/Modify QoS Classification Rules

Click Add in the QoS Classification screen to open the following screen.
Figure 16 QoS Classification
The following table describes the labels in this screen.
Table 13 QoS Classification: Add/Modify
LABEL
Direction
RuleName
RuleOrder
Specify Traffic Classification Rules
Chapter 5 Advance
DESCRIPTION
Enter a priority level with which the FMG replaces the IEEE 802.1p priority field in the packets.
Use this to delete an existing classifier. Note that subsequent rules move up by one when
you take this action.
Use this to edit the classifier.
Click Add to create a new classifier.
Click Apply Changes to save your changes.
DESCRIPTION
Select the direction (Upstream or Downstream) that you want to allocate using QoS.
Enter a descriptive name of up to 15 printable English keyboard characters, not including
spaces.
Enter a number for where you want to put this classifier to move the classifier to the number you
selected after clicking Apply Changes.
FMG Series User's Guide
30