Log Descriptions; Table 114 System Maintenance Logs - ZyXEL Communications ZYWALL P1 User Manual

Table 113 LOGS > Log Settings (continued)
LABEL
Send Immediate Alert
Log Consolidation
Active
Log Consolidation
Period
Apply
Reset

22.3.1 Log Descriptions

This section provides descriptions of example log messages.

Table 114 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client IP expired
DHCP server assigns %s
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Starting Connectivity
Monitor
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
ZyWALL P1 User's Guide
DESCRIPTION
Select the categories of alerts for which you want the ZyWALL to instantly e-
mail alerts to the e-mail address specified in the Send Alerts To field.
Some logs (such as the Attacks logs) may be so numerous that it becomes
easy to ignore other important log messages. Select this check box to merge
logs with identical messages into one log.
You can use the sys log consolidate msglist command to see what
log messages will be consolidated.
Specify the time interval during which the ZyWALL merges logs with identical
messages into one log.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
The router has adjusted its time based on information from
the time server.
The router failed to get information from the time server.
A WAN interface got a new IP address from the DHCP,
PPPoE, PPTP or dial-up server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's web configurator
interface.
Someone has failed to log on to the router's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via FTP.
Someone has failed to log on to the router via FTP.
The maximum number of NAT session table entries has been
exceeded and the table is full.
Starting Connectivity Monitor.
The router got the time and date from the Daytime server.
The router got the time and date from the time server.
The router got the time and date from the NTP server.
Chapter 22 Logs
347