Figure 73 Network > Bridge; Table 30 Network > Bridge - ZyXEL Communications ZYWALL P1 User Manual

Chapter 7 Bridge Screens
In bridge mode, if you need to let DHCP clients behind the ZyWALL use a
DHCP server on the WAN, enable the default WAN to LAN firewall rule for the
BOOTP_CLIENT service.
Figure 73 NETWORK > Bridge
The following table describes the labels in this screen.
Table 30 NETWORK > Bridge
LABEL
Bridge Setup
IP Address
IP Subnet Mask
Gateway IP Address
122
DESCRIPTION
Type the IP address of your ZyWALL in dotted decimal notation. Use an IP
address in the same subnet as the network to which you connect the
ZyWALL. Make sure the IP address does not conflict with any other device
on the network.
The subnet mask specifies the network number portion of an IP address.
Enter the gateway IP address.
ZyWALL P1 User's Guide