Secure Ftp Using Ssh Example; Figure 200 Ssh Example 2: Log In; Figure 201 Secure Ftp: Firmware Upload Example - ZyXEL Communications ZYWALL P1 User Manual

2 Enter "ssh –1 192.168.167.1". This command forces your computer to connect
to the ZyWALL using SSH version 1. If this is the first time you are connecting to the
ZyWALL using SSH, a message displays prompting you to save the host information of
the ZyWALL. Type "yes" and press [ENTER].
Then enter the password to log in to the ZyWALL.

Figure 200 SSH Example 2: Log in

$ ssh –1 192.168.167.1
The authenticity of host '192.168.167.1 (192.168.167.1)' can't be
established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.167.1' (RSA1) to the list of known
hosts.
Administrator@192.168.167.1's password:
3 The command line interface displays next.

18.10 Secure FTP Using SSH Example

This section shows an example on file transfer using the OpenSSH client program. The
configuration and connection steps are similar for other SSH client programs. Refer to your
SSH client program user's guide.
1 Enter "sftp –1 192.168.167.1". This command forces your computer to connect
to the ZyWALL for secure file transfer using SSH version 1. If this is the first time you
are connecting to the ZyWALL using SSH, a message displays prompting you to save
the host information of the ZyWALL. Type "yes" and press [ENTER].
2 Enter the password to login to the ZyWALL.
3 Use the "put" command to upload a new firmware to the ZyWALL.

Figure 201 Secure FTP: Firmware Upload Example

$ sftp -1 192.168.167.1
Connecting to 192.168.167.1...
The authenticity of host '192.168.167.1 (192.168.167.1)' can't be
established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.167.1' (RSA1) to the list of known
hosts.
Administrator@192.168.167.1's password:
sftp> put firmware.bin ras
Uploading firmware.bin to /ras
Read from remote host 192.168.167.1: Connection reset by peer
Connection closed
$
ZyWALL P1 User's Guide
Chapter 18 Remote Management
303