Installing Upnp In Windows Example - ZyXEL Communications ZYWALL P1 User Manual

Chapter 19 UPnP
Table 102 ADVANCED > UPnP > Ports (continued)
LABEL
External Port
Protocol
Internal Port
Internal Client
Enabled
Description
Lease Duration
Apply
Refresh

19.4 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
316
DESCRIPTION
This field displays the port number that the ZyWALL "listens" on (on the WAN port)
for connection requests destined for the NAT rule's Internal Port and Internal
Client. The ZyWALL forwards incoming packets (from the WAN) with this port
number to the Internal Client on the Internal Port (on the LAN). If the field
displays "0", the ZyWALL ignores the Internal Port value and forwards requests
on all external port numbers (that are otherwise unmapped) to the Internal Client.
This field displays the protocol of the NAT mapping rule (TCP or UDP).
This field displays the port number on the Internal Client to which the ZyWALL
should forward incoming connection requests.
This field displays the DNS host name or IP address of a client on the LAN.
Multiple NAT clients can use a single port simultaneously if the internal client field
is set to 255.255.255.255 for UDP mappings.
This field displays whether or not this UPnP-created NAT mapping rule is turned
on. The UPnP-enabled device that connected to the ZyWALL and configured the
UPnP-created NAT mapping rule on the ZyWALL determines whether or not the
rule is enabled.
This field displays a text explanation of the NAT mapping rule.
This field displays a dynamic port-mapping rule's time to live (in seconds). It
displays "0" if the port mapping is static.
Click Apply to save your changes back to the ZyWALL.
Click Refresh update the screen's table.
ZyWALL P1 User's Guide