Figure 229 Maintenance > General Setup; Table 136 Maintenance > General Setup - ZyXEL Communications ZYWALL P1 User Manual

Chapter 23 Maintenance
Figure 229 MAINTENANCE > General Setup
The following table describes the labels in this screen.
Table 136 MAINTENANCE > General Setup
LABEL
General Setup
System Name
Domain Name
Administrator
Inactivity Timer
Enable
Management
FQDN
Management
FQDN
366
DESCRIPTION
Choose a descriptive name for identification purposes. It is recommended you enter
your computer's "Computer name" in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If
you leave this blank, the domain name obtained by DHCP from the ISP is used.
While you must enter the host name (System Name), the domain name can be
assigned from the ZyWALL via DHCP.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Type how many minutes a management session (either through the web
configurator or commands) can be left idle before the session times out. The default
is 5 minutes. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks. A value of "0" means a management
session never times out, no matter how long it has been left idle (not
recommended).
Turn on the management FQDN (fully qualified domain name) to use a domain
name to access the ZyWALL from the LAN. This allows you to access the ZyWALL
without knowing its IP address.
The ZyWALL must be in router or zero configuration mode to use the management
FQDN to access it.
Type a fully qualified domain name (FQDN) to use for managing the ZyWALL
(www.mydevice.com. for example).
An FQDN starts with a host name and continues all the way up to the top-level
domain name. In the example, www.mydevice.com, "www" is the host, "mydevicel"
is the second-level domain, and "com" is the top level domain.
ZyWALL P1 User's Guide