ZyXEL Communications ZYWALL P1 User Manual page 398

Chapter 24 Zero Configuration Screens
Table 151 INTERNET ACCESS (PPPoE Encapsulation) (continued)
LABEL
IP Address
Assignment
My WAN IP
Address
First DNS Server
Second DNS
Server
Apply
Reset
24.2.2.3 PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.
The ZyWALL supports one PPTP server connection at any given time.
398
DESCRIPTION
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to
access it.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL P1 User's Guide