Snmp; Table 96 Advanced > Remote Mgmt > Ftp - ZyXEL Communications ZYWALL P1 User Manual

Chapter 18 Remote Management
The following table describes the labels in this screen.
Table 96 ADVANCED > REMOTE MGMT > FTP
LABEL
Server Port
Server Access
Secure Client IP
Address
Apply
Reset

18.15 SNMP

Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. Your
ZyWALL supports SNMP agent functionality, which allows a manager station to manage and
monitor the ZyWALL through the network. The ZyWALL supports SNMP version one
(SNMPv1). The next figure illustrates an SNMP management operation. SNMP is only
available if TCP/IP is configured.
SNMP is only available if TCP/IP is configured.
306
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyWALL using
this service.
Clear all of the interface check boxes to disable FTP access to the ZyWALL.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
ZyWALL P1 User's Guide