Logs; Figure 257 Logs; Table 153 Security - ZyXEL Communications ZYWALL P1 User Manual

The following table describes the labels in this screen.

Table 153 SECURITY

LABEL
Enable Intrusion
Detection and
Protection
Enable Anti-Virus
IDP Signature and
Anti Virus Pattern
Update
Update Server
Update Now
Apply
Reset

24.4 LOGS

Click LOGS to display this screen. Use the View Log screen to see the logs for the categories
that you selected in the Log Settings screen (you must log into the web configurator to access
the Log Settings screen). See
selecting categories of logs for the ZyWALL to collect.
Log entries in red indicate system error logs. The log wraps around and deletes the old entries
after it fills. Click a column heading to sort the entries. A triangle indicates ascending or
descending sort order.

Figure 257 LOGS

ZyWALL P1 User's Guide
DESCRIPTION
Select this check box to enable IDP on the ZyWALL. When this check box is
cleared the ZyWALL is in IDP "bypass" mode and no IDP checking is done.
Select this check box to check traffic for viruses. The anti-virus scanner works on
the following.
FTP traffic using TCP ports 20 and 21
HTTP traffic using TCP ports 80, 8080 and 3128
POP3 traffic using TCP port 110
SMTP traffic using TCP port 25
This is the URL of the server from which you download the signatures and
pattern file.
Click this button to download the signature and pattern file from the Update
Server immediately.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 22 on page 341
Chapter 24 Zero Configuration Screens
for more information on the logs and
401