Figure 322 Routing Command Example - ZyXEL Communications ZYWALL P1 User Manual

Appendix H Command Interpreter

Figure 322 Routing Command Example

ras> ipsec ipsecEdit 1
ras> ipsec ipsecConfig encryKeyLen 1
ras> ipsec ipsecDisplay
---------- IPSec Setup ----------
Index #= 1
Bound IKE 9999
ControlPing = No
Local:
Remote: Addr Type= SINGLE
Enable Replay Detection= No
Phase 2 - Active Protocol= ESP
ras>
472
Active= No
NailUp = No
LogControlPing = No
Addr Type= SINGLE
IP Addr Start= 0.0.0.0
IP Addr Start= 0.0.0.0
Encryption Algorithm= AES
Encryption Key Length = 192
SA Life Time (Seconds)= 28800
Encapsulation= Tunnel
Multi Pro = No Protocol= 0 Global SW= 0xA
Netbios = No Name= test
Control ping address = 0.0.0.0
Port Start= 0
Mask= N/A
Port Start= 0
Mask= N/A
Key Management= IKE
Authentication Algorithm= SHA1
Perfect Forward Secrecy (PFS)= None
End= N/A
End= N/A
ZyWALL P1 User's Guide