Zero Configuration Screens; Zero Configuration Web Configurator Access; Figure 251 Internet Access - ZyXEL Communications ZYWALL P1 User Manual

C
H A P T E R

Zero Configuration Screens

This chapter describes the ZyWALL's zero configuration web configurator screens.

24.1 Zero Configuration Web Configurator Access

In zero configuration mode, you can use some web configurator screens without logging in
with the administrator password. Use the following process to access the web configurator
when the ZyWALL is in zero configuration mode. See
into the web configurator when the ZyWALL is in router or bridge mode.
1 Make sure your ZyWALL hardware is properly connected and prepare your computer/
computer network to connect to the ZyWALL (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type the ZyWALL's IP address as the URL ("192.168.167.1" is the default).
Alternatively, if you have enabled the management FQDN (Fully Qualified Domain
Name), you can use the management domain name to access the ZyWALL from the
LAN (see
4 The INTERNET ACCESS screen displays.

Figure 251 INTERNET ACCESS

ZyWALL P1 User's Guide
Section 23.3 on page 365 for details).
24
Section 2.2 on page 43 for how to log
393