Table 120 CDR Logs
LOG MESSAGE
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel %d,
call %d, %s C02 Call
Terminated
Table 121 PPP Logs
LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP
Starting
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
Table 122 UPnP Logs
LOG MESSAGE
UPnP pass through Firewall
For type and code details, see
Table 123 Attack Logs
LOG MESSAGE
attack [ TCP | UDP | IGMP
| ESP | GRE | OSPF ]
attack ICMP (type:%d,
code:%d)
land [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]
land ICMP (type:%d,
code:%d)
ZyWALL P1 User's Guide
DESCRIPTION
The router received the setup requirements for a call. "call" is
the reference (count) number of the call. "dev" is the device
type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP).
"channel" or "ch" is the call channel ID. For example,"board 0
line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0
"Means the router has dialed to the PPPoE server 3 times.
The PPPoE, PPTP or dial-up call is connected.
The PPPoE, PPTP or dial-up call was disconnected.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol stage is
opening.
The PPP connection's Internet Protocol Control Protocol stage is starting.
The PPP connection's Internet Protocol Control Protocol stage is opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is closing.
DESCRIPTION
UPnP packets can pass through the firewall.
Table 131 on page
360.
DESCRIPTION
The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF attack.
The firewall detected an ICMP attack.
The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF land
attack.
The firewall detected an ICMP land attack.
Chapter 22 Logs
351