Introducing Vantage Cnm; Configuring Cnm; Figure 206 Advanced > Remote Mgmt > Dns; Table 99 Advanced > Remote Mgmt > Dns - ZyXEL Communications ZYWALL P1 User Manual

Chapter 18 Remote Management
Figure 206 ADVANCED > REMOTE MGMT > DNS
The following table describes the labels in this screen.
Table 99 ADVANCED > REMOTE MGMT > DNS
LABEL
Server Port
Service Access
Secure Client IP
Address
Apply
Reset

18.17 Introducing Vantage CNM

Vantage CNM (Centralized Network Management) is a browser-based global management
solution that allows an administrator from any location to easily configure, manage, monitor
and troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for
details.
If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not
configure the ZyWALL (using either the web configurator or commands) without notifying
the Vantage CNM administrator.

18.18 Configuring CNM

Vantage CNM is disabled on the device by default. Click ADVANCED > REMOTE MGMT
> CNM to configure your device's Vantage CNM settings.
310
DESCRIPTION
The DNS service port number is 53 and cannot be changed here.
Select the interface(s) through which a computer may send DNS queries to the
ZyWALL.
Clear all of the interface check boxes to have the ZyWALL discard all DNS queries
destined for the ZyWALL itself.
A secure client is a "trusted" computer that is allowed to send DNS queries to the
ZyWALL.
Select All to allow any computer to send DNS queries to the ZyWALL.
Choose Selected to just allow the computer with the IP address that you specify to
send DNS queries to the ZyWALL.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
ZyWALL P1 User's Guide