ZyXEL Communications ZYWALL P1 User Manual page 268

Chapter 15 Authentication Server
Table 83 SECURITY > AUTH SERVER > RADIUS
LABEL
Key
Accounting Server
Active
Server IP Address
Port Number
Key
Apply
Reset
268
DESCRIPTION
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and ZyWALL.
Select the check box to enable user accounting through an external
authentication server.
Enter the IP address of the external accounting server in dotted decimal
notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external accounting server and ZyWALL.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL P1 User's Guide