F/W Upload Screen; Figure 238 Maintenance > Firmware Upload; Table 145 Maintenance > Firmware Upload - ZyXEL Communications ZYWALL P1 User Manual
Internet security appliance
Hide thumbs
Also See for ZYWALL P1:
- Quick start manual (72 pages) ,
- Quick start manual (64 pages) ,
- User manual (369 pages)
Table of Contents
Advertisement
Chapter 23 Maintenance
23.17 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.bin extension, for example, "zywall.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See
Section 23.21 on page 387
Click MAINTENANCE > F/W UPLOAD. Follow the instructions in this screen to upload
firmware to your ZyWALL.
Only upload firmware for your specific model!
Figure 238 MAINTENANCE > Firmware Upload
The following table describes the labels in this screen.
Table 145 MAINTENANCE > Firmware Upload
LABEL
File Path
Browse...
Upload
Do not turn off the ZyWALL while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyWALL again.
380
for upgrading firmware using FTP/TFTP commands.
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
ZyWALL P1 User's Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
