Figure 69 Physical Network and Partitioned Logical Networks
The ZyWALL must be in router mode in order to use IP alias.
To change your ZyWALL's IP alias settings, click NETWORK > LAN > IP Alias. The
screen appears as shown.
Figure 70 NETWORK > LAN > IP Alias
The following table describes the labels in this screen.
Table 26 NETWORK > LAN > IP Alias
LABEL
Enable IP Alias 1,
2
IP Address
IP Subnet Mask
ZyWALL P1 User's Guide
DESCRIPTION
Select the check box to configure another LAN network for the ZyWALL.
Enter the IP address of your ZyWALL in dotted decimal notation.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Your ZyWALL will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the ZyWALL.
Chapter 6 LAN Screens
115