How To Setup Ipv6 Interfaces For Pure Ipv6 Routing - ZyXEL Communications ZyWALL ATP Series Handbook

How to Setup IPv6 Interfaces for Pure IPv6 Routing

This example shows how to configure your USG Z's WAN and LAN interfaces which
connects two IPv6 networks. USG Z periodically advertises a network prefix of
2006:1111:1111:1111::/64 to the LAN through router advertisements.
ZyWALL/USG access the internet via IPv6
Note:
Instead of using router advertisement, you can use DHCPv6 to pass the
network settings to the computers on the LAN.
This example was tested using USG110 (Firmware Version: ZLD 4.25) and ZyWALL
310 (Firmware Version: ZLD 4.25).
www.zyxel.com
454/782