Object Reference Command Example - ZyXEL Communications NXC Series Cli Reference Manual

Chapter 3 Object Reference
Table 7 show reference Commands (continued)
COMMAND
show reference object-group aaa
radius [group_name]
show reference object [wlan-
radio-profile]
show reference object [wlan-
monitor-profile]
show reference object [wlan-
ssid-profile]
show reference object [wlan-
security-profile]
show reference object [wlan-
macfilter-profile]

3.1.1 Object Reference Command Example

This example shows how to check which configuration is using an address object named
LAN1_SUBNET. For the command output, firewall rule 3 named LAN1-to-NXC is using the
address object.
Router(config)# show reference object address LAN1_SUBNET
LAN1_SUBNET References:
Category
Rule Priority
Description
===========================================================================
Firewall
3
LAN1-to-NXC
Router(config)#
36
DESCRIPTION
Displays which configuration settings reference the
specified AAA RADIUS group object.
Displays the specified radio profile object.
Displays the specified monitor profile object.
Displays the specified SSID profile object.
Displays the specified security profile object.
Displays the specified macfilter profile object.
Rule Name
N/A
NXC CLI Reference Guide