Adding Lan Terminals; Deleting Lan Terminals; Step 7-15: Deleting Lan Terminals - Nortel CC MIS User Manual

CC MIS
Note: At least one of either Per-
sonal Reports or Public Reports
must be set to Yes in order for
Global Views and Monitor to be
set to Yes.
Otherwise, these fields are set to
No.
Note: Basic must be set to Yes
for any other privilege to be set
to Yes.
Otherwise, all are automatically
set to No.
7-30

Adding LAN Terminals

Perform the steps below to add a LAN terminals.
Step 7-14: Adding LAN terminals
1. Access the Partition Configuration screen.
2. Press the Configuration Options function key to display Configuration
Options menu.
3. Select LAN Terminals from the Configuration Options menu.
The system displays the LAN Terminals screen.
4. Press the Add function key.
5. Enter the Ip address or range of IP addresses (refer to format shown on
add screen for entering ranges).

Deleting LAN Terminals

Perform the steps below to delete LAN terminals.

Step 7-15: Deleting LAN terminals

1. Access the Partition Configuration screen.
2. Press the Configuration Options function key to display Configuration
Options menu.
3. Select LAN Terminals from the Configuration Options menu.
The system displays the LAN Terminals screen.
4. Highlight the LAN terminal to be deleted, then press the Delete
function key.
5. Select the Save & Exit option from the Commands menu.
Release 5.2
297-2671-545