Features Added In Release 5.0; Features Added In Release 5.1; Features Added In Release 5.2 - Nortel CC MIS User Manual

CC MIS
1-6

Features Added in Release 5.0

The following enhancements and changes were made to the Mainte-
nance Interface in Software Release 5.0.
• DHCP feature that allows LAN-based supervisor terminals to con-
nect to CC MIS without their IP address being defined in the
CC MIS Maintenance Interface. This feature is configured on the
Partition Options screen.
IP addresses for static LAN terminals are still defined in the
Static LAN Terminals screen. Terminology change on the Parti-
tion Configuration screen in the Maintnenace Interface (LAN
Terminals changed to Static LAN Terminals). This change is in
conjunction with the DHCP feature.
• Two additional fields were added to the Storage Calculator (Agent
Trace Data and Disk Space for Agent Trace) in the CC MIS Main-
tenance Interface.
• The Key Code feature was added to allow customer software to be
upgraded remotely using a key code.

Features Added in Release 5.1

The following enhancements and changes were made to the Mainte-
nance Interface in Software Release 5.1.
• A TCP/IP switch link connection was added for LAN connection
from the switch to CC MIS. This change is implemented in the
Switch Link Configuration screen.
• Expanded the Time Zone Management feature to allow multiple
time zones per CC MIS node. Time zones are set using the Parti-
tion Options screen.

Features Added in Release 5.2

The following enhancements and changes were made to the Mainte-
nance Interface in Software Release 5.2.
• Support for the new data access options from Priviledge Level
definition required corresponding changes to Master Priviledge
Definition so that these options could be enable/disabled on a par-
tition-wide basis.
Release 5.2
297-2671-545