Nortel CC MIS User Manual page 184

CC MIS
9-16
Table 9-2: Program status screen fields
Parameter
State Indicates current state of program.
Valid states are:
Run - Program is running
Ready - Ready to run
Init - Initialized
KillP - Kill is pending
Dying - System is killing program
User ID The user ID of the user using the program.
Service ID The ID assigned to each program. Format is
<partition ID>.<process ID>
Requestor The service ID of the program requesting this
program.
PRIO Indicates the priority at which the program is
running. The format is <priority type> <priority
number>. Valid priority types are TS (time
share) and RT (real time). Processes with lower
priority numbers are given higher priority. This
column is blank for transient programs that
have not been started.
Sanity Indicates the amount of time left before a pro-
gram must report sanity again. Programs that
do not report within the Sanity time are killed.
Lower Portion
of Screen
Partition Type Partition type. A "BASE" program serves all
partitions. A "CUST" program is an invocation
of a program for a particular partition.
Start Prio Start priority. The priority with which the pro-
gram was or will be started.
Transient Class Transient class. The program's transient class
(USERS, REPORTS, PCWALLBOARDS, or
None).
Args The arguments that were passed to the program
when it was started.
Release 5.2
Description
297-2671-545