Figure 8.4 Physical Network Configuration Screen - Nortel CC MIS User Manual

Release 5.2
Note: System configuration
must be completed before
accessing the physical net-
work configuration screen.
CC MIS Maintenance Guide
Physical Network Configuration
Various components of the CC MIS need to know the node ID and ad-
dress (IP address or host name) of CC MIS systems within its physical
network. Nodes that have NAP Partitions which gather information
from other nodes must use this screen to specify the addresses of those
nodes in the Physical Network Configuration.
The views of the physical network may vary from node to node de-
pending upon whether NAP partitions are used, and to which remote
nodes the local node has access.
Selecting Physical Network Configuration from the Configuration
main menu displays the Physical Network Configuration screen.

Figure 8.4 Physical Network Configuration screen

The local node (Node ID 0) is listed as part of the physical network
configuration. Initially the Node Name and Address are collected by
the system configuration. (The address field cannot be changed.)
Note: When the system is down, the System Down text string is dis-
played in the upper left hand corner of the screen. The string appears
in all configuration screens until the system is started.
CC MIS
CC MIS
8-7