Nortel CC MIS User Manual page 89

Release 5.2
CC MIS Maintenance Guide
Table 6-1: System configuration field descriptions
Field
Maintenance Printer
(187 or 197 platforms)
Unix Printer
(PowerPC platforms)
CC MIS
CC MIS
Description
Printer where the maintenance reports
and logs are spooled. This is a direct-
connect, hard-wired printer. The
maintenance printer can be added to
any port which is not currently in use
by a partition.
Press the Options menu to select ports,
modem, baud rate, and printer models.
(Up to 25 characters can be entered for
the printer name.) Use the port alloca-
tion key to view port allocations.
Note 1: The maintenance (system)
printer can be connected to the VME
using the parallel port.
Note 2: Graphical reports cannot be
printed on the Maintenance Printer.
Designated (unix-defined) printer
where the maintenance reports and
logs are spooled.
Printers on the PowerPC must first be
configured using the Add a Unix
Printer command in the Operating
System Configuration menu before
they can be configured into CC MIS.
6-5