Guidelines; Table 7-4: Disk Allocation Screen Parameters; Step 7-4: Assigning A Disk - Nortel CC MIS User Manual

CC MIS
Automated
Calculations
Starting in Release 4.1, an Ana-
lyze Configuration
function key was added to the
Storage Calculator screen.
Pressing this
function key allows the
storage calculator to analyze the
values for your system based on
data received from the switch
and your system configuration.
7-14

Guidelines

Perform the steps below to assign a disk or move a partition
from one disk to another.

Step 7-4: Assigning a disk

1. In the Disk allocation screen, cursor to the Disk No field.
2. Enter the disk number on which the partition is to reside.
Note: Select a disk that has enough space. Check the Disk Usage field to see
which disk has adequate space.
The table below defines the parameters and gives their limits.:

Table 7-4: Disk allocation screen parameters

Option
Partition Name
Size Limit
Space In Use
% In Use
Disk No.
% Disk Alloc
Defines
The name of the partition as defined in
the Partition Configuration screen.
The maximum space (in megabytes)
allocated for storage of the partition's
data. This field can be changed on this
screen or using the storage calculator.
The number of megabytes of the parti-
tions' allocated space that is currently
in use by partition.
The percentage of the partitions' allo-
cated space that is currently in use.
Computed as follows: Space In Use /
Size Limit x 100.
The disk number on which the parti-
tion's data resides. This field is used to
move a partition to a new disk.
The portion of the entire disk that is al-
located to the partition. Computed
as follows: Size Limit / Disk Size x
100.
Release 5.2
297-2671-545