Supervisor Privileges; Guidelines - Nortel CC MIS User Manual

Maintenance interface
Hide thumbs Also See for CC MIS:
Table of Contents

Advertisement

Release 5.2
Note: if default colors is
set to Yes in the Admin
Privileges, then it is always set
to Yes and cannot be set to No.
CC MIS Maintenance Guide

Supervisor Privileges

Supervisors on a partition can make configuration changes to multiple
local partitions.
The master supervisor privilege definition is used to disable supervi-
sor privileges on a partition. (The definition's default setting is to en-
able all privileges.) If a supervisor privilege is disabled in the master
privilege definition for the partition, then that privilege will be dis-
abled for all supervisors in that partition. However, individual super-
visors can be assigned an override where by their privileges are not
restricted by the master privilege definition.
The master privilege definition is comprised of several screens. The
first screen is a menu which is accessed from the Configuration Op-
tions menu in the Partition Configuration screen. This screen lists se-
lections to set privileges in any of the five privilege areas that make up
the master privilege definition and a selection to set supervisor over-
rides.

Guidelines

Perform the steps below to access the Master Privilege Definition
screen.
Note: Partitions must be running to access the Master Privilege
screens.
Step 7-16: Accessing the Master Privi-
1. Access the Maintenance and Administration menu.
2. Enter c to access the Configuration main menu.
The system displays the Configuration main menu.
3. Press the Configuration Options function key to display Configuration
Options menu.
4. Select Partition Configuration to access the Partition Configuration
screen. Highlight the desired partition.
5. Select Master Privilege Definition from the Configuration Options menu.
The system displays the Partition Options screen.
Selection of an option causes a secondary screen to be displayed. This
screen is used set the appropriate privileges or supervisor overrides.
The Master Privilege Definition menu screen is shown in the figure
below.
lege screen
CC MIS
CC MIS
7-31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cc mis 5.2

Table of Contents