Nortel CC MIS User Manual page 290

CC MIS
CC MIS
System Log Messages
Keyboard description file is empty
The <term>.KD file contained no properly formatted key translation specifications. (Action Code: B)
Menu does not contain any menu items
Request was made to create a menu that has no items defined. (Action Code: B)
Unable to open ACD-MIS termcap file.
The file defined by environment variable ACDTERMCAP could not be found or its access rights prohibited
reading it. (Action Code: B)
Pathname of video attributes file is unknown
The aF entry in the ACDTERMCAP file was not specified. (Action Code: B)
Unable to open video attributes file
The aF entry in the ACDTERMCAP file was given incorrectly such that the video attributes file can not be found
(Action Code: B)
Error reading video attributes file
Though the <term>.VA file could be found and had read access rights available, an error occurred in reading the
file. (Action Code: B)
Error reading special characters file
Though the <term>.SC file was located and allowed read access, an error occurred during reading it. (Action
Code: B)
Could not set terminal into raw mode
Attempt to reset standard input parameters failed. (Action Code: B)
Non-contiguous CELL array
This error indicates that the DSP's memory allocation for c types char and byte are not equal. (Action Code: B)
Too many virtual screens
The number of defined virtual screens has reached its maximum number. (Action Code: B)
Too many windows
The number of defined windows has reached its maximum number. (Action Code: B)
Number of windows is inconsistent
The window counter indicates that at least one window slot should be available, but the window number array is
full. (Action Code: B)
No entry found in ACDTERMCAP file for yyyy
The specified term setting is not valid, or is not supported. (Action Code: AI)
Memory allocation failure
The process was unable to allocate enough memory. (Action Code: B)
B-50
Release 5.2
297-2671-545