Nortel CC MIS User Manual page 243

Release 5.2
U Check/verify report parameters.
V Verify system default printer has been defined. Check maintenance/configuration as well as Parameter
Administration/Miscellaneous Options.
W Consult the backup log.
X Adjust report parameters.
Y Check connectivity between CC MIS host and supervisor terminal.
Z Check for compatibility of Windows interface software and CC MIS host software.
AA Consult the restore log.
AB Check CC MIS configuration.
AC Re-initialize the X.25 card via the "X.25 Diagnostics" screen in the maintenance interface.
AD Discontinue use of the "Call Park" feature.
AE Verify that switch datafill uses only one login ID partition per subpool.
AF The backup did not complete and may need to be restarted and monitored.
AG The restore did not complete and the system may be in an unknown state. The restore may need to be
restarted and closely monitored.
AH Deselect translation of un-needed messages and retry.
AI Check/Verify configuration.
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-3