CC MIS
3-14
Run state utilities menu
The run state utilities menu provides access to commands used for
start-up and shutdown of the CC MIS system and individual partitions,
and contains the update switch configuration data command (former-
ly available in the Supervisor interface).
Figure 3.7 Run state utilities menu
Diagnostics menu
The diagnostics menu provides access to diagnostic programs for
CC MIS.
Figure 3.8 Diagnostics menu
The File Transfer command is available only and
Note:
displayed on this menu if you are logged in through
the maintenance modem. This command is not
available on the PowerPC platform.
Release 5.2
297-2671-545