Nortel CC MIS User Manual page 166

CC MIS
8-24
Table 8-10: Partition options screen fields
Parameter
Maximum ACD Groups
Maximum Positions
Maximum Wallboard
Ports
Maximum Supervisor
Connections
Maximum Logins
Dynamic LAN Terminal
Access
Partition Password
Confirm Password
Description
Maximum number of ACD groups the parti-
tion may datafill in the Storage Calculator.
Note: Acceptable ranges for this field differ
depending on the type of partition: Local or
NAP.
Maximum number of agent positions the par-
tition may datafill in the Storage Calculator.
Note: Acceptable ranges for this field differ
depending on the type of partition: Local or
NAP.
Maximum number of wallboard ports the par-
tition may use. A zero value indicates that the
Wallboard option is not enabled.
Maximum number of connections, including
hard-wired, LAN, and pass-through that this
partition can have at one time. This informa-
tion is used to limit the number of running
processes on the system. This field must be
greater than or equal to the Maximum Logins
field.
Maximum number of supervisors that can be
logged in to the system for the partition at a
given time. This field must be less than or
equal to the Maximum Supervisor Connec-
tions field.
Allows the Supervisor Terminal in the Win-
dows interface to connect to the partition
without the terminal's address being defined
in the Static LAN Terminal screen. (This field
enables the DHCP feature that was added in
Release 5.0).
When Enabled, enter a password for the par-
tition.
Confirm the password by re-entering it on
this field
Release 5.2
297-2671-545