Ddbserv Messages - Nortel CC MIS User Manual

CC MIS
CC MIS
System Log Messages

DDBSERV Messages

Introduction
This section contains error messages generated by the Definitions Database Server Process of the CC MIS product.
The CC MIS product runs on a Down Stream Processor, hence the error messages will NOT APPEAR IN THE
SWITCH LOG.
This section lists only those messages which are unique to the Defintiions Database Server Process. Messages listed
in STANDARD ERROR MESSAGES on page 1 may also be generated by this process.
Warning Messages
This section lists the warning messages that may be generated by DDBSERV. These messages usually indicate an
unusual condition that can be appropriately handled by the process, and which does not prevent the process from con-
tinuing execution.
Current database changed during linear pass
While enumerating the records in a particular database table, the database server detected a change in the current
table. The enumeration function is aborted. (Action Code: B)
Database delete failed -- table: xxxxx, key: yyyyy
The database server was unable to delete the record whose key value is "yyyyy" from database table "xxxxx".
(Action Code: B)
Database open error - database: xxxxx
The database server was unable to open the database file specified by "xxxxx". (Action Code: B)
Database write access denied - database: xxxxx
The database server attempted to perform a write operation on the read-only database file specified in "xxxxx".
(Action Code: B)
Duplicate entry in dblimits file on line: xx
A duplicate record limit entry was found on line "xx" in the database limits file. (Action Code: B)
Invalid class specification in dblimits file on line: xx
A record limit specification for an invalid record class was found on line "xx" in the database limits file. (Action
Code: B)
Invalid limit value in dblimits file on line: xx
An invalid record limit value was found on line "xx" in the database limits file. (Action Code: B)
Invalid record name - name: xxxxx
A database operation was attempted on a record name that is unknown to the database server. The name of this
record is given in the "xxxxx" field. (Action Code: B)
B-80
Release 5.2
297-2671-545