Nortel CC MIS User Manual page 293

Release 5.2
***Invalid APR subgroup [xxxx] configured for agent [xxxx]
An invalid APR subgroup is configured for agent xxxx. (Action Code:
Fatal Error Messages
Fatal error messages are generated by STSMGR in response to conditions which prevent the process from continuing
normal execution. This section lists these error messages.
Can't get database storage limit
STSMGR was unable to determine the database storage limit. (Action Code: B)
Subpool yyyy on link xxxx does not exist
The subpool yyyy on link xxxx does not exist. (Action Code:
STOREPARMS table access failed (rc = xxxx)
STSMGR encountered an error while trying to access the storage parameters. (Action Code: B)
Informational Messages
The following messages do not actually indicate an error condition but are used as notification of significant events
which occur as part of normal operation.
Transitioning to Daylight Savings Time
The STSMGR process has switched to daylight savings time. (Action Code: J)
Transitioning to Standard Time
The STSMGR process has switched to standard time. (Action Code: J)
AGE request has been issued
An AGE request has been issued. (Action Code: J)
AGE -c request has been issued
An AGE -c request has been issued. (Action Code: J)
Closing ACDDN statistics interval file.
Occurs when the storage parameters are updated. (Action Code: J)
Closing LOB statistics interval file.
Occurs when the storage parameters are updated. (Action Code: J)
Closing Walkaway statistics interval file.
Occurs when the storage parameters are updated. (Action Code: J)
Database is no longer full. Records will now be saved
The Database now has space to add new records. (Action Code: J)
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-53