Figure 0.3 Configuration Update Prompt Screen (Single Link) - Nortel CC MIS User Manual

Release 5.2
CC MIS Maintenance Guide
The figure below is an example of the prompt for a single link. Enter
"y" to continue or "n" to quit.

Figure 0.3 Configuration update prompt screen (single link)

Use the steps below to run a configuration update.
Step 10-2: Running a configuration up-
______________________________________________
For single link:
______________________________________________
1. From the Configuration update screen, enter:
a. y to run the configuration update for the specified link(s)
-or-
b. q to quit without running the update.
_______________________________________________
For multiple links:
_______________________________________________
1. From the Configuration update screen, enter:
a. the number of the desired link for the update
and press <RETURN> to run the update.
-or-
b. q to quit without running the update.
date
CC MIS
CC MIS
10-3