Nortel CC MIS User Manual page 183

Release 5.2
CC MIS Maintenance Guide
Table 9-2: Program status screen fields
Parameter
Flags The status flags are listed below (in order from
left to right). The "-" indicates the flag is turned
off or is reserved.
No. Char Description
_____________________________________
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. x
11. s
12. t
Description
M The program is the current master
time source.
A The program has acquired a source
of reliable time.
S The program is a potential source of
reliable time.
T Program is sensitive to abrupt time
change.
2 If the "n" flag (described below) is
set, the program which requested
this program will be sent a USR2
signal when this program dies.
1 If the "n" flag (described below) is
set, the program which requested
this program will be sent a USR1
signal when this program dies.
c There is a socket connection
between this program and the
program which requested it.
d The program will be terminated if
the program requesting it dies.
n The program which requested this
program will be notified when this
program dies.
The program is performing
processing during which its
normal sanity period has been
extended.
The program is suspended (only
applicable for static programs).
This is the template for this
program.
CC MIS
CC MIS
9-15