Figure 3.9 Direct Os Configuration - Nortel CC MIS User Manual

CC MIS
This command is used
to change your system's
OS configuration.
It is highly recommended
that it be used only by
trained system
administrators.
13-6
Making direct changes to the OS configuration
Selecting the Direct OS Configuration command displays a screen that
allows you to change any operating system parameter. The warning
message shown below is displayed to allow you to abort the action pri-
or to making any changes to the configuration.

Figure 3.9 Direct OS Configuration

Typing "Y" and pressing <Return> results in the configuration screen
being displayed. To abort this operation type "N" and press <Return>.
Release 5.2
297-2671-545