Figure 8.12 Virtual Network Configuration Screen - Nortel CC MIS User Manual

Release 5.2
CC MIS Maintenance Guide
Virtual Network Configuration
The Virtual Network Configuration screen is used to define which Lo-
cal Partitions can be accessed from a NAP partition. These partitions
comprise the virtual network with which the NAP is associated.
The Virtual Network Configuration screen is shown in the figure
below.

Figure 8.12 Virtual Network Configuration screen

The Virtual Network Configuration screen fields are described in the
table below.
Table 8-8: Virtual Network Configuration field descriptions
Field
Physical Node Name
Physical Node ID
Local Partition Name
Local Partition ID
Partition Code
Description
The name of a Physical Node.
The ID of a Physical Node.
The name of the Local Partition on the Physical
Node that may be accessed via the NAP.
The ID of the Local Partition.
This is an editable field used to enter a four char-
acter alpha-numeric partition identifier.
Note: This identifier is used in a network to create
unique agent IDs subgroups, and position IDs.
CC MIS
CC MIS
8-19