Table 8-5: Function Key Commands - Nortel CC MIS User Manual

CC MIS
8-12
The Add Partition, Delete Partition, and Validate
Partition function keys are displayed by pressing
Note:
the F12 function key. The Validate Partition option
is available for both local and NAP partitions.
The function keys in this screen are listed below:

Table 8-5: Function key commands

Key Description
Exit Exits the current screen.
Add Partition Adds a partition. A window is displayed to select the
partition type (Local or NAP) and to enter the partition
name.
Note: If NAPs are not allowed on the system
(Maximum NAPs = 0), then the partition type field will
not appear in the pop-up window, and the partition name
is input as described in Chapter 7.
Delete Partition Deletes a partition. A window containing a list of parti-
tions is displayed from which the partition to be deleted
is selected. A confirmation window is displayed before
the partition is deleted.
Note: The Delete Partition key is available only if a par-
tition has been configured.
Release 5.2
297-2671-545