Usrif Messages - Nortel CC MIS User Manual

Release 5.2

USRIF Messages

Introduction
This section contains the error messages generated by the USRIF subsystem of the CC MIS product. USRIF writes
the messages to its 'Standard Error' device The error messages may contain [XX] and/or 'YYYY' which denote any
numeric and/or string, respectively.
Warning Messages
This section lists the warning messages that may be generated by the USRIF subsystem. These messages usually indi-
cate an unusual condition that can be appropriately handled by the process, and which do not prevent the process
from continuing execution.
Too many help screens. Help will appear out of sync with current screen.
Help screens have nested too deeply (beyond MAX_STACK_TAGS-1). When this occurs, the additional levels
are ignored. The visible effect of this is help text that doesn't match the screen where help is being sought.
(Action Code: B)
No '=' found in keyboard description entry
Entry in <term>.KD file is improperly formatted. (Action Code: B)
No terminating '\' found for keyboard label
A key translation specification in the <term>.KD file contains only the name of the key. (Action Code: B)
Keystroke sequence missing
The sequence of characters sent from the keyboard for this key is missing from the <term>.KD file. (Action
Code: B)
Logical function key definition is missing
The key translation sequence for a required key is missing. (Action Code: B)
Periodic function list is full
An attempt to add another function to the list of functions periodically activated while awaiting keyboard input
has failed because the list is full. (Action Code: B)
Invalid window number
A request was made to redraw a non-existent window. (Action Code: B)
Window does not correspond to a menu
Request made to redraw a window that is not a menu. (Action Code: B)
Failed to determine spool pipe status
Was unable to determine status of the pipe serving the print spooler. (Action Code: B)
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-47