Table of Contents
Advertisement
ADDITIONAL FEATURES
Viewing the Telephone Page:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select SATELLITE PHONE.
3) If necessary, select the TEL Softkey to display the AUX‑TELEPHONE Page.
The PHONE STATUS display, as shown in Figure 8-81, gives a graphical representation of the current disposition
of voice and/or data transmissions. Table 8-5 describes symbology used on PHONE STATUS display.
ENABLE/DISABLE THE IRIDIUM TELEPHONE SYSTEM
The Iridium Satellite Telephone System may be turned on or off by using the page menu.
To enable the Iridium telephone system:
1) With the AUX‑TELEPHONE Page displayed, select the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on 'Enable Iridium Transmission'.
3) Press the ENT Key.
528
Strength
Figure 8-81 Phone Status Display
Figure 8-82 Enable Iridium Telephone System
Garmin G1000 Pilot's Guide for the Diamond DA62
Satellite
Signal
External
Phone
190-01895-00 Rev. A
Advertisement
Table of Contents
Troubleshooting
