Garmin G1000 Diamond DA62 Pilot's Manual page 423

Customizing the traffic display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key (Figure 6-156).
4) Turn the small FMS Knob to select the Traffic Group and press the ENT Key (Figure 6-157).
5) Turn the large FMS Knob or press the ENT Key to scroll through the selections (Figure 6-158).
• TRAFFIC – Turns the display of traffic data on or off
• TRAFFIC MODE – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA/PA - Displays Traffic Alerts and Proximity Advisories
- TA ONLY - Displays Traffic Alerts only
• TRAFFIC SMBL – Selects the maximum range at which traffic symbols are shown
• TRAFFIC LBL – Selects the maximum range at which traffic labels are shown with the option to turn off
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings, etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page.
Figure 6-156 Navigation Map Page Menu
Figure 6-157 Navigation Map Page
190-01895-00 Rev. A
Setup Menu
Garmin G1000 Pilot's Guide for the Diamond DA62
HAZARD AVOIDANCE
Figure 6-158 Navigation Map Page Setup Menu,
Traffic Group
409