Garmin G1000 Diamond DA62 Pilot's Manual page 317

CELL MOVEMENT
Cell Movement data (Figure 6-20) shows the location and movement of storm cells as identified by the
ground-based system. Cells are represented by yellow squares, with direction of movement indicated with
short, orange arrows.
Storm Cells
On most applicable maps, Cell Movement data is selected for display along with NEXRAD. On the Weather
Data Link (XM) Page, Cell Movement data can be selected independently.
Displaying Cell Movement information:
1) Press the MAP Softkey (for the PFD Inset Map, press the INSET Softkey). This step is not necessary on the XM
Weather Data Link Page.
2) Press the NEXRAD Softkey (CEL MOV Softkey on the Weather Data Link (XM) Page). For Cell Movement to
be displayed on maps other than the Weather Data Link (XM) Page, Cell Movement must be turned on in the
Navigation Map Setup Menu (see the procedure "Setting up and customizing weather data for the Navigation
Map Page").
To display the Cell Movement legend on the Weather Data Link (XM) Page, (Figure 6-21), press the LEGEND
Softkey when Cell Movement is selected for display.
190-01895-00 Rev. A
Figure 6-20 Cell Movement Data
Figure 6-21 Cell Movement Legend
Garmin G1000 Pilot's Guide for the Diamond DA62
HAZARD AVOIDANCE
303