Garmin G1000 Diamond DA62 Pilot's Manual page 34

SYSTEM OVERVIEW
INSET
• INSET
OFF
DCLTR (3)
INSET
WX LGND
INSET
OFF DCLTR
TRAFFIC (2) Displays/removes traffic information on Inset Map
DCLTR-1
TOPO
DCLTR-2
TERRAIN
DCLTR-3
STRMSCP
NEXRAD
XM LTNG
METAR
INSET
OFF DCLTR
DCLTR-1
DCLTR-2
DCLTR-3
20
PFD OBS CDI
Figure 1-16 Top Level PFD Softkeys
Displays Inset Map in PFD lower left corner
Removes Inset Map
Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except active flight plan
Displays icon and age on the Inset Map for the selected weather products (optional)
PFD OBS CDI
(optional)
WX LGND
TRAFFIC TOPO
TRFC-1: Displays traffic on Inset Map.
TRFC-2: Removes everything except traffic. Inset Map position HDG UP only.
TRFC-1
Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Inset Map
TRFC-2
Displays/removes terrain information on Inset Map
Displays/removes Stormscope weather information on Inset Map (optional)
Displays/removes NEXRAD weather and coverage information on Inset Map (optional)
Displays/removes XM lightning information on Inset Map (optional)
Displays METAR flags on airport symbols shown on the Inset Map
(optional)
WX LGND TRAFFIC TOPO
TRFC-1
TRFC-2
Figure 1-17 INSET Softkeys
Garmin G1000 Pilot's Guide for the Diamond DA62
(optional)
ADF/DME XPDR IDENT TMR/REF
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
(optional) (optional)
(optional)
PRECIP DL LTNG
ADF/DME XPDR IDENT TMR/REF
(optional)
or
STRMSCP
TERRAIN NEXRAD XM LTNG
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
(optional)
(optional)
PRECIP DL LTNG
(optional)
or
TERRAIN STRMSCP NEXRAD XM LTNG
NRST ALERTS
NRST ALERTS
(optional)
or
METAR BACK ALERTS
Press the OFF or BACK Softkey
to return to the top-level softkeys.
(optional)
(optional)
or
METAR BACK ALERTS
Press the OFF or BACK Softkey
to return to the top-level softkeys.
190-01895-00 Rev. A